All Categories
EN

Home> blogs> How to start the engine of the water pump?

How to start the engine of the water pump?

2021-12-17 Page view : 294 views

1. Place the water pump on solid ground. Ensuring there is nothing around the water pump because it is dangerous when it works.

2. In order to activate the engine, move the choke lever to the CLOSED position.

3. Move the throttle lever away from the IDLE position, but no further over the halfway point.

4. Turn the ignition switch to the “START” position.

5. While holding the equipment firmly, pull out the starter rope quickly until the engine runs.

Leave a comment

Your email address will not be published. Required fields are marked *